Pub. No. 1218 - February 2008
11
BELOW DOCK END LOADS — FROM
HORIZONTAL POSITION
1. If the truck/trailer is lower than the level dock, press
and hold the PLATFORM RAISE button to lift the
platform and lip from the lip supports. Release the
PLATFORM RAISE button. See Figure 6.
2. Press and hold the LIP EXTEND button until the lip
extends just beyond the lip supports while still in the
pendant position and release the button.
3. Press and hold the PLATFORM LOWER button until
the platform comes to rest on the pit floor. Release
the button.
4. When completed, raise the platform, extend the lip
and lower the lip onto the truck/trailer for normal
loading/unloading operations.
RITE-HITE
®
RHV Dock Leveler Owner’s Manual
OPERATING INSTRUCTIONS CONT.
To Perform A Below Dock End Load
When The Truck/Trailer Is Lower
Than The Level Dock, Press
And Hold PLATFORM RAISE Button
To Lift Platform, Then Release.
Press And Hold LIP EXTEND Button
Until The Lip Extends Beyond The
Lip Supports, Then Release.
!
MILWAUKEE, WISCONSIN 53224
(414) 355-2600
CORPORATION
1 .
Rlkdf asdlsdf sdf sdfllku ulkk or foio oilsafjloo oosfmosf ads asd
dsf sdf odfmsd, osdf fooi as aso'f/idlodfu ofoap9e psdoiua. Ad
lsdijo 9iols oas asofpfpsp pas.
4 .
Rlkdf asdlsdf sdf sdfllku ulkk or
foio oilsafjloo oosfmosf ads asd dsf sdf odfmsd
osdf fooi as aso'f/idlodfu ofoap9e
psdoiua. Adlsdijo 9iols oas asofpfpsp pasjoiuiojiioqe?werijqwo9.
5 .
Rlkdf asdlsdf sdf sdfllku ulkk oriureqi oiewru sertew9tr w
• foio oilsafjloo oosfmosf ads asd dsf sdf odfmsderttrt 8tuer9 8u
osdf fooi as.
• psdoiua. Adlsdijo 9iols oas asofpfpsp pasjoiuiojiioqe?werijqwo9df
osdf asdf a indkhja.
• lsdkjur aoidfiuiaosd asfsf asf fo o ofpspofo.
• akfjjskf aidfi truwioa iaufisofoa asdsfs.
2 .
Rlkdf asdlsdf sdf sdfllku ulkk or foio oilsafjloo oosfmosf ads asd
dsf sdf odfmsd, osdf fooi as aso'f/idlodfu ofoap9e psdoiua. Ad sdlkjjs
lsdijo 9iols oas asofpfpsp passuf sdo as9ret9 weru qwe9r qw qq
ewrwer 987sfhs as asffdio ads adsf w49r8 qeapsiuasd9.
3 .
Rlkdf asdlsdf sdf sdfllku ulkk or foio oilsafjloo oosfmosf ads assd
dsf sdf odfmsd, osdf fooi as aso'f/idlodfu ofoap9e psdoiua. Asdfd
lsdij.
PLATFORM RAISE
PRESS & HOLD UNTIL LIP RESTS ON TRAILER BED.
TO STOP LEVELER RAMP MOVEMENT, RELEASE BUTTON
PRESS & HOLD UNTIL LIP RESTS ON TRAILER BED
TO STOP LEVELER RAMP MOVEMENT, RELEASE BUTTON
PRESS & HOLD TO EXTEND LIP
LIP EXTEND
LIP EXTEND
PLATFORM LOWER
1) POSITION PLATFORM AT 45 BY PRESSING
"PLATFORM LOWER" OR "PLATFORM RAISE"
PUSH BUTTON. RELEASE BUTTON AND LIP
WILL FALL.
2). END LOADING AT DOCK HEIGHT. PRESS &
HOLD "PLATFORM LOWER" BUTTON UNTIL
PLATFORM IS LEVEL WITH THE DOCK FLOOR
AND THE LIP IS IN THE SUPPORTS.
3) END LOADING BELOW DOCK HEIGHT
POSITION THE PLATFORM SO THAT THE LIP
IS ABOVE THE SUPPORTS BUT NOT ABOVE
THE TRUCK BED. PRESS THE "LIP EXTEND"
PUSH BUTTON MOMENTARILY UNTIL LIP
CLEARS THE SUPPORTS. IMMEDIATELY
PRESS & HOLD "PLATFORM LOWER " UNTIL
PLATFORM STOPS LOWERING.
FIGURE 6 - BELOW DOCK END LOAD
To Perform A Below Dock End Load
When The Truck/Trailer Is Lower
Than The Level Dock, Press
And Hold PLATFORM RAISE Button
To Lift Platform, Then Release.
Press And Hold LIP EXTEND Button
Until The Lip Extends Beyond The
Lip Supports, Then Release.
!
MILWAUKEE, WISCONSIN 53224
(414) 355-2600
CORPORATION
1 .
Rlkdf asdlsdf sdf sdfllku ulkk or foio oilsafjloo oosfmosf ads asd
dsf sdf odfmsd, osdf fooi as aso'f/idlodfu ofoap9e psdoiua. Ad
lsdijo 9iols oas asofpfpsp pas.
4 .
Rlkdf asdlsdf sdf sdfllku ulkk or
foio oilsafjloo oosfmosf ads asd dsf sdf odfmsd
osdf fooi as aso'f/idlodfu ofoap9e
psdoiua. Adlsdijo 9iols oas asofpfpsp pasjoiuiojiioqe?werijqwo9.
5 .
Rlkdf asdlsdf sdf sdfllku ulkk oriureqi oiewru sertew9tr w
• foio oilsafjloo oosfmosf ads asd dsf sdf odfmsderttrt 8tuer9 8u
osdf fooi as.
• psdoiua. Adlsdijo 9iols oas asofpfpsp pasjoiuiojiioqe?werijqwo9df
osdf asdf a indkhja.
• lsdkjur aoidfiuiaosd asfsf asf fo o ofpspofo.
• akfjjskf aidfi truwioa iaufisofoa asdsfs.
2 .
Rlkdf asdlsdf sdf sdfllku ulkk or foio oilsafjloo oosfmosf ads asd
dsf sdf odfmsd, osdf fooi as aso'f/idlodfu ofoap9e psdoiua. Ad sdlkjjs
lsdijo 9iols oas asofpfpsp passuf sdo as9ret9 weru qwe9r qw qq
ewrwer 987sfhs as asffdio ads adsf w49r8 qeapsiuasd9.
3 .
Rlkdf asdlsdf sdf sdfllku ulkk or foio oilsafjloo oosfmosf ads assd
dsf sdf odfmsd, osdf fooi as aso'f/idlodfu ofoap9e psdoiua. Asdfd
lsdij.
PLATFORM RAISE
PRESS & HOLD UNTIL LIP RESTS ON TRAILER BED.
TO STOP LEVELER RAMP MOVEMENT, RELEASE BUTTON
PRESS & HOLD UNTIL LIP RESTS ON TRAILER BED
TO STOP LEVELER RAMP MOVEMENT, RELEASE BUTTON
PRESS & HOLD TO EXTEND LIP
LIP EXTEND
LIP EXTEND
PLATFORM LOWER
1) POSITION PLATFORM AT 45 BY PRESSING
"PLATFORM LOWER" OR "PLATFORM RAISE"
PUSH BUTTON. RELEASE BUTTON AND LIP
WILL FALL.
2). END LOADING AT DOCK HEIGHT. PRESS &
HOLD "PLATFORM LOWER" BUTTON UNTIL
PLATFORM IS LEVEL WITH THE DOCK FLOOR
AND THE LIP IS IN THE SUPPORTS.
3) END LOADING BELOW DOCK HEIGHT
POSITION THE PLATFORM SO THAT THE LIP
IS ABOVE THE SUPPORTS BUT NOT ABOVE
THE TRUCK BED. PRESS THE "LIP EXTEND"
PUSH BUTTON MOMENTARILY UNTIL LIP
CLEARS THE SUPPORTS. IMMEDIATELY
PRESS & HOLD "PLATFORM LOWER " UNTIL
PLATFORM STOPS LOWERING.
FIGURE 7 - BELOW DOCK END LOAD
