RITE-HITE REVOLUTION SP, Инструкция по установке и эксплуатации

Страница: 16 / 32

REVOLUTION SP FAN
16
Pub. No. RFSP Rev. 5 - December 2010
CONTROL BOX MOUNTING
Mount the control box securely to a wall or building column with appropriate anchors (not
provided). The box should not be greater than 200 ft. (61m) from the fan it is controlling. The fan
should be visible from where the control box is mounted. Mount the VFD control box in a location
where it will still be accessable for troubleshooting.
The electrical system (ground system, insulation etc.) must be verified by an authorized
electrician before fan is put into operation. The verification data should be entered in a record
and be stored by the customer.
RECOMMENDED FUSE RATINGS
Recommended Branch Recommended
Circuit Protection Incoming Service
Input Voltage Amps Amps
110-120V, 1PH, 60 Hz. 20A 20A
200-240V, 1PH, 60 Hz. 15A 15A
200-240V, 3PH, 60 Hz. 15A 10A
460-480V, 3 PH, 60 Hz. 15A 6A
380V, 3PH, 50 Hz. 15A 6A
575V, 3PH, 60 Hz. 10A 6A
INPUT WIRING
Bring the input wires into the bottom of the fuse block. Tighten the screws to secure the wires.
Insert the wires that are going to the motor into the contact blocks that are labeled U, V, W.
Insert the ground wire into the green contact block.
MOTOR RATING
Motor
Input Voltage Volts Freq. F.L.A
200-240V, 1PH, 60 Hz. 230 60 3.2
200-240V, 3PH, 60 Hz. 400 60 3.2
460-480V, 3 PH, 60 Hz. 460 60 1.6
380V, 3PH, 50 Hz. 380 50 1.8
Increasing the speed of the fan beyond
factory set limits is not recommended and
can shorten the life of the motor.
WA R N I N G ! ! !
!