HL-800 HYDRAULIC DOCK LEVELER
20
Pub. No. 1167-R2 - April 2003
INSTALLATION INSTRUCTIONS - CONTINUED
COMPLETION
ANCHOR PLATE
(SUPPLIED BY OTHERS)
DETAIL "U"
1. Raise leveler and engage maintenance support.
2. Remove lip supports from front frame angle (right side).
3. Disengage maintenance support and lower leveler to below dock position.
4. Manually raise platform until it is level with dock floor and support leveler.
5. Locate and weld lip supports to front pit steel as shown in Detail "T". NOTE: If front curb steel does not exist, anchor
plates must be used. See details below. (Supplied by others)
6 Adjust the lip stop bolt to allow the lip to be centered on lip supports.
5/8" X 5 LONG
ANCHOR. QTY 4
(SUPPLIED BY OTHERS)
6
1
8
Ø 3/4
13 1/2
3
LIP SUPPORT INSTALLATION (20" LIPS ONLY)
DETAIL "T"
WITH PIT STEEL
WITHOUT PIT STEEL
1/4
2 PLACES
2 PLACES
1/4
13 1/2
Figure - 18 Lip Support Installation
Содержание LEVEL-RITE HL-800 Series
