Rishabh RISH LM 1340, Руководство по эксплуатации

Страница: 50 / 106

3.2.5.1.1.1.1 Parameter Selection
This screen allows the user to assign energy for pulse output.
Pressing “ ” key accepts the present setting and advance to “Pulse
duration selection” (see section 3.2.5.1.1.1.2) and pressing “ ” key
accepts the present setting and advance to “Quit Relay Output” selection
(see section 3.2.5.1.1.1.4).
Pressing the “ ” key advances to edit mode and “ ” and “ ” keys
scrolls through the values, as per
TABLE 2.1
, “parameters for pulse
output”.
Pressing the “ ” key sets the value & gives the “Parameter Selection”
menu (see section 3.2.5.1.1.1.1).
NOTE: Default configuration is set as ‘0’, i.e., System Wh Import.
3.2.5.1.1.1.2 Pulse Duration
This screen applies only to the Pulse output mode of relay. This screen
allows the user to set Relay energization time in milliseconds.
Pressing “ ” key accepts the present value and advance to “Pulse Rate”
screen ( see section 3.2.5.1.1.1.3). Similarly, pressing “ ” key accepts the
present value and advance to “Parameter Selection” screen ( see section
3.2.5.1.1.1.1).
Pressing the “ ” key advances to “Pulse Duration Edit” mode and “ ”
and “ ” keys scroll the value through
60, 100 and 200
ms.
Pressing the “ ” key selects the value and advances to “Pulse Duration ” menu
(see Section 3.2.5.1.1.1.2).
NOTE: Default value is set to ‘100’ ms.
Edit mode
XX XX XX XX
XX XX XX XX
XX XX XX XX
48