Rishabh RISH LM 1340, Руководство по эксплуатации

Страница: 41 / 106

3.2.2 Communication Parameter Selection
3.2.2.1 Address Setting
3.2.1.16 Quit System Parameters
This screen allows user t o Exit from System Parameter selection
setup.
Pressing the “ ” key advances to “System Type” screen (see Section
3.2.1.1). Similarly, pressing the “ ” key advances to “Version Information”
screen (see Section 3.2.1.15). Pressing the “ ” key advances to “System
Parameter Selection” screen (see Section 3.2.1).
This screen applies to the RS 485 output only. This screen allows the user
to set RS 485 address for the meter.
The allowable range of addresses is 1 to 247.
Press “ ” key to advance to “RS 485 Baud Rate” screen (see Section
3.2.2.2) or press the “ ” key to advance to the “Quit Communication
Parameters” screen (see Section 3.2.2.4).
XX XX
Press “ ” to enter into edit mode, prompt for first digit.
Press the “ ” and “ ” keys to scroll the value of the first digit. Press the
“ ” key to advance to next digit.
Similarly, enter second and third digits of address. After entering third digit,
pressing “ ” key confirms the selection and shows “Address Setting”
screen (see Section 3.2.2.1).
NOTE : The default setting is ‘1’.
XX XX
XX XX
39