Communication interface setting:
This meter has 2 interfaces for communication
(Bluetooth or USB). Please note that at any given time only one interface can be used for
communication. To select which interface to use you can press the USB/bluetooth button in
the more settings window. The currently activated interface is shown by the icon of this
button.
Audio read out setting:
As discussed before, this meter also has the audio read out feature.
The meter reads out the insulation resistance values and other parameters like Polarization
index(PI) and Dielectric Absorption Ratio(DAR) with the help of powerful speaker. This
feature can be turned on/off by pressing the mute/unmute button. Please note that even if
the speaker is muted the meter will give cautionary beeps at the start of the test. This feature
comes in very handy where the screen of meter is not directly accessible.
Reset default settings:
The meter settings(control settings and settings in the setting
window) can be set to their default value using the reset default button in the more settings
window.
usb/bluetooth
button
mute/unmute
button
41
