11. Installation
Mounting is by four side clamps, slide the side clamps
through side slot till side clamp gets rmly locked in a
groove (Refer g.) Consideration should be given to the
space required behind the instrument to allow for
bends in the connection cables. As the front of the
enclosure conforms to IP54 it is protected from water
spray from all directions, additional protection to the
panel may be obtained by the use of an optional panel
gasket.
The terminals at the rear of the product should be
protected from liquids.
The instrument should be mounted in a reasonably
stable ambient temperature and where the operating
temperature is within the range -20 to 70 C.
SLIDE IN THIS DIRECTION
AND LOCK
PANEL
Meter
Caution
1.
In the interest of safety and functionality this product must be installed by
a qualified engineer, abiding by any local regulations.
2.
Voltages dangerous to human life are present at some of the terminal
connections of this unit. Ensure that all supplies are de-energised before
attempting any connection or disconnection.
3.
These products do not have internal fuses therefore external fuses must
be used to ensure safety under fault conditions.
0
Vibration should be kept to a minimum and the product should not be mounted where it will be
subjected to excessive direct sunlight.
61
