3.2.4.1.2.9 De-Energizing Delay
This screen allows the user to set De-Energizing Delay time in
seconds
for Relay Limit
Assigned Parameters.
Here 0 to 9 digit input keypad is provided to set the De-Energizing
delay & user can confirm this value with a simple touch on “ key”.
and cancel the change by touching the “ key”.
The allowable range is
0 to 9999 seconds
.
If value outside the range is entered, it will display “INVALID VALUE”
followed by correct range of parameter.
(For details refer to section 9.2)
SET DE-ENERGIZING DELAY IN SEC
RELAY-1 DE-ENERGIZING DELAY
ENTER
BACK
3.2.4.1.3 Timer Output
After entering in the “TIMER OUTPUT”, List of following parameters will be displayed :-
3.2.4.1.3.1 NUMBER OF CYCLES
3.2.4.1.3.2 TIMER CONFIGURATION
3.2.4.1.3.3 ON DELAY
These settings are used to assign Relay1 in Timer output mode.
3.2.4.1.3.4 OFF DELAY
3.2.4.1.3.1 Number of Cycles
The value decides how many times the timer will repeat the switching
after it has been started in the
timer based relay output option
.
Here 0 to 9 digit input keypad is provided to set the No. of Cycles &
user can confirm this value with a simple touch on “ key”. and
cancel the change by touching the “ key”.
The value for this parameter can range from
0000 to 9999.
ENTER THE NO. OF CYCLES
RELAY-1 NO. OF CYCLES
ENTER
BACK
31
