Follow all permission, installation and inspection requirements. Before installing module, contact appropriate
authorities to determine permission, installation and inspection requirements that should be followed.This should be
done not only for installations in conjunction with buildings, but also for marine and motor vehicle applications for
which additional requirements may apply.
Be sure that the construction intended to install modules on its rooftop has enough strength.For modules mounted on
roof, special construction may be required to help provide proper installation. Both roof construction and module
installation design have an effect on the fire resistance of the building. Improper installation may contribute to
hazards in the event of fire. Additional devices such as ground fault,fuses and disconnects may be required.
Do not use modules of different configurations in the same system.
Follow all safety precautions of other used components.
INSTALLATION
Please read this guide completely before installing or using the modules. This section contains electrical and
mechanical specifications before using your RISEN photovoltaic modules.
Modules should be firmly fixed in place In a manner suitable to withstand all expected loads, including wind and
snow loads.
Do not drill additional mounting holes in the module frames, as it will void the warranty.
The appropriate material should be employed for mounting hardware to prevent the module frame, mounting
structure and hardware itselffrom corrosion. Please install modules at the place where they are not shaded by the
obstacles like building and trees.Especially, please pay attention to avoid partially shading modules by something in
daytime.