Risco WiComm-1, Руководство пользователя

Страница: 90 / 97

Chapter 8. Appendix
Firmware Update via Telnet
1. After accessing the WiComm-1 via Telnet, enter the user name and the password. After the WiComm-1 is
connected, ftp is enables with the [set ftp on] command.
2. After opening the Command Prompt window, move to the folder with the firmware file (WiComm-
11_FS_10b.bin).
(The figure below shows the case that the firmware file is saved in a folder with the path of C:\WiComm-
11_firmware.
3. Access the folder by using an FTP command. (GUI-based FTP client is available).
4. Enter ‘WiComm-1’ and ‘99999999’ as the user name and the password, separately.
5. Enter the [cd /var] command to move to the directory where file upload is available. Other directories do not
allow writing because of security.
6. Enter the [bin] command for the transmission of a binary file or the [hash] command for setting the view of
transmission status.
7. Call the [put WiComm-11_FS_10b.bin] to start the upload of the file.
8. If the transmission completion message appears, disconnect the connection by using the [quit], [by] or [bye]
command.
Figure 8-2. Firmware Update via Telnet
8-2