Risco WiComm-1, Руководство пользователя

Страница: 27 / 97

Chapter 4. Installation
4.2.2 Environment Setting
After connecting a power cable to a power adapter or a terminal block, the WiComm-1 is booted when the power of
WiComm-1 is turned on. Since, however, wireless network setting is not provided in the initial factory setting, the
environment setting for the LAN port of the WiComm-1.
For the environment setting, a user should be aware of followings:
y
The IP address of the WiComm-1 should be set before connected to a network.
y
The default value for the network of the equipment is Static. If the network supports Dynamic Host
Configuration Protocol (DHCP), the WiComm-1 searches a DHCP server automatically to assign an IP address
just after the WiComm-1 is turned on.
y
If the network does not support DHCP, a fixed IP address should be set up.
y
In most cases, since DHCP servers do not assign the same addresses whenever the WiComm-1 is turned on, it
is recommended to use a fixed IP address. (Contact a user system administrator for technical support).
1) Setting via Web
A user can easily carry out the environment setting for the WiComm-1 via the Web and can access the Web by using
any Web browser. For detailed information, refer to ‘Chapter 5. Setting via Web’.
2) Setting by Telnet
A user can carry out the environment setting for the WiComm-1 by Telnet. For detailed information, refer to
‘ Chapter 6. Setting by Telnet’ .
3) Setting via Portview
The WiComm-1 can be monitored via Port view, which is a windows-based utility developed by SystemBase Co.,
Ltd. For detailed information, refer to Portview User’s Manual.
4-3