STEP 64
Now connect your receiver and attach it to the other fuselage side.
STEP 65
Complete the assembly of your model by attaching a length of velcro to your battery and the
battery tray. A velcro strap is used to offer additional security and retain the battery through
limitless 3D manoeuvres.
Control Throws
For initial flights, we recommend the following control throws-each measured at the widest point
of the surface:
Elevator: 20mm up
20mm down
Rudder: 40mm left
40mm right
Ailerons: 18mm up
18mm down
Balancing the WOT 4-T
the Center of Gravity(C/G or Balance point) should be 70mm back from the leading edge of the
