6
|
Rinnai Smart Cylinders low-medium pressure indoor stainless steel: Owner and installer guide: 20432-A 01-15
Safety messages
• Element cover
Do not remove the
element cover, this will
expose 230 V wiring, it
must only be removed by
an authorised person.
• Damaged components
If any component is
damaged, it must be
replaced by an authorised
person using Rinnai
replacement parts.
• Child supervision
Children should be
supervised to ensure they
do not play with any part
of the hot water system.
• Hot pipe work
Care should be taken not
to touch the pipe work
from the cylinder as this
could be very hot.
Safety devices
Your cylinder should have
the following safety devices
fitted.
V
alVe
Vented
systems
- pressure reducing valve
- pressure relief valve
- cold water expansion valve
- tempering valve
- energy cutout thermostat
O
pen
vented
systems
- pressure reducing valve
- tempering valve
- energy cut-out thermostat
- vent pipe
Do not operate the system
unless all the safety devices
are fitted and are in working
order. It is also important that
you do not tamper or remove
any of these devices.
Your hot water system has an
energy cutout thermostat.
The operation of this thermal
cut-out indicates a dangerous
situation. Do not reset the
thermal cutout until the
cylinder has been serviced by
an authorised person.
Draining and filling the
system
This normally occurs during
installation or servicing and
must be carried out by an
authorised person.
Installation by a licensed
tradesperson
Only a licensed tradesperson
can install, adjust, maintain,
and service this water heater.
Any work carried out by a
non-licensed tradesperson
is illegal and will void any
warranty.
Turning the cylinder on/off
(we don't recommend this)
If you switch the
cylinder off for more
than 18 hours it will
lose all the water usage
history.
LIMITED
WARRANTY*
10
Important
All cylinders have the potential to leak water. To minimise damage to
other areas of your home, ensure that your cylinder has been installed
with a drip tray—the person doing the installation is responsible for this.
* Refer to the warranty terms and conditions in this guide for more information.
IMPORTANT
