• © 2009 Rinnai America Corporation
10
RS100 Power-on Initialization
The following sequence will occur every time power is reset or the “reset” button on the boiler is pressed
This process takes about 30 seconds
RS100
– Display during initialization
A display test
will occur where
all characters
are illuminated
The selected language will
display.
“GB” = English
If factory defaults are restored to
the controller, this should be
changed to ―GB‖
Pressing the dial will exit the
language display quicker
The current
software version
will display
(Version 2.3 is
current as of
10/09)
Auto set will display for
a few seconds.
NOTE:
If the A and B wires are
reversed from the
controller to the boiler,
the controller will not
exit this page
