Rinnai
11
Operation Manual
PROGRAMMED HEATER OPERATION
USING THE TIMERS
USING THE OVERRIDE FUNCTION
Prior to using timers ensure that the desired temperature has been set. See
ADJUSTING THE TEMPERATURE on page 8.
One or both Timers can be used. While the heater is in operation press to start
Timer 1 press the Timer 1
button. To start Timer 2 press the Timer 2
button. The display briefly shows the status of each Timer (e.g. Timer 1 ON
Timer 1 OFF). If the current time is outside those programmed the heater will
go in to stand-by mode and the Timer Indicator
will glow ‘Green’.
To turn the Timer(s) off simply press the relevant Timer button again. The
heater will return to stand-by mode and the Operation Indicator
will glow
‘Green’, if there are no timers set the Timer Indicator
will go out.
When operated by the Timer(s) the Flame Function is not available. If desired the
flame picture can be controlled by raising or lowering the set temperature.
This function is used to manually override Timer programmed operation.
When the Override
button is pressed Override”
will be displayed to
confirm that the function has been selected. Whilst in Override mode all
remote control functions except for the flame function are available until the
next Timer event.
To return to Timer programmed operation press the Override
button a
second time.
If the STANDBY/ON
button is pressed during Override operations the
heater will revert to STANDBY and the Timer programs will be cancelled.
USING THE EXTRA LOW FUNCTION
The Extra Low function is useful in situations when the room temperature
keeps rising even when the heater is on the lowest heat setting.
Extra Low Function ‘OFF’
When the room temperature reaches the preset temperature with the Extra
Low function ‘OFF’, the heater continues to operate with the main burner on
low to provide a flame picture with minimal heat output. In some cases this
may still cause the room to become warmer than desired.
Extra Low Function ‘ON’
When the room temperature exceeds the preset temperature with the Extra
Low function ‘ON’ the burner will reduce to an extra low setting. The burner
will return to normal to maintain the set temperature.
To switch the Extra Low function ‘ON’, press the Extra Low
button once.
"Extra Low"
will be displayed to confirm that the function has been
selected.
To switch the Extra Low function ‘OFF’, press the Extra Low
button again.
THE LOCK FUNCTION
By pressing the Lock
button all the functions of the remote control will be
locked with the exception of the STANDBY/ON
button for the purpose of
turning the heater to STANDBY only.
The Remote Control Display
will show "Lock"
in the top left hand
corner.
To cancel the Lock function hold down the Lock
button for 3 seconds.
14
15
9
8
9
Temperature
Lock
AM
PM
Timer 1
OFF
ON OFF
Timer 2 Set
Auto Off
Time
Flame
26
9
8
NOTE
16
29
16
11
17
30
17
Temperature
Lock
AM
PM
Timer 1
OFF
ON OFF
Timer 2 Set
Override
Auto Off
Time
Flame
29
STANDBY
ON
Flame
Extra
Low
Lock
Timer 2
Timer 1
Overide
Time
Set
Temperature
Lock
Clock
AM
PM
Timer 1
Set
Set
ON OFF
ON OFF
Timer 2 Set
OverrideAuto Off
Time
Flame
20
21
14
15
16
17
19
18
11
13
12
Temperature
Lock
AM
PM
OFF
ON OFF
Timer 2 Set
Extra Low
Time
Flame
30
19
11
20
28
19
Temperature
Lock
AM
PM
Timer 1 Set
ON OFF
ON OFF
Timer 2 Set
Override Auto Off
Time
28
