Rinnai REU-VR2632FFUD - 26i, Инструкция по установке и эксплуатации

Страница: 29 / 64

29
The Rinnai internal range are for internal installation in conjunction with the Rinnai flue system .
The flue must be installed in accordance with:
-Manufacturers Installation Instructions; -British Standards including BS5440;
-Gas Safety (Installation and Use) Regulations; -IGE/UP/10 Part1 Edition 2;
-Building Regulation J.
Such other specifications and regulations that may supersede or complement the above documents.
The flue must be installed by a competent, authorised person. It is the installer’s responsibility to
ensure that the unit has been installed to all current requirements.
Location of the appliance flue terminal must be in accordance with the clearances shown in BS5440-
1:2000. Table and Figure C.1 is provided below for your guidance:
The flue terminal should be over 2m from ground level whenever possible.
For lower installations a terminal guard must be installed.
UK FLUE REQUIREMENTS
Terminal Position Distance (mm)
A Directly below an opening, air brick, opening windows, etc. 300
B
Above an opening, air brick , opening window, etc. 300
C Horizontally to an opening, air brick , opening window, etc. 300
D
Below gutters, soil pipes or drain pipes. 75
E
Below eaves. 200
F
Below balconies or car port roof. 200
G From a vertical drain pipe or soil pipe. 150
H
From an internal or external corner. 200
I Above ground, roof or balcony level. 300
J
From a surface facing the terminal. 600
K
From a terminal facing a terminal 1200
L From an opening in a car port. into a dwelling 1200
M
Vertically from a terminal on the same wall. 1500
N
Horizontally from a terminal on the same wall. 300
O From the wall on which the terminal is mounted N/A
P
From a vertical structure on the roof. N/A
Q Above an intersection with roof. N/A