4
|
Rinnai Boil & Brew: Owner and installer guide: 20830-C 03-18
About your Rinnai Boil & Brew
The Rinnai Boil & Brew is a permanently
plumbed, wall-mounted electric water heater
with an insulated hot water container. Water
is heated by an electric heating element and
the temperature is controlled by a thermostat.
As boiling water is drawn off, the unit refills
with cold water. Any steam generated during
the heating cycle is condensed and retained
within the unit.
The easy to use lever tap is positioned far
enough away from the spout to ensure
steam-free handling. The spout is designed to
minimise splashing when dispensing water.
Automatic reheating
Once installed the filling and heating cycle is
completely automatic.
To use
Place a cup under the outlet spout and pull
the tap handle down. The tap handle is spring
loaded, when released it will spring back to
the off position.
If for some reason you need to dispense a
large volume of water or empty the unit the
tap handle can be pulled up and locked into a
continuous flow position.
Switching off
If not connected to a timer we suggest
switching the unit off if not being used for a
period of time, for example over a weekend.
When not in use
If the unit has been switched off for a long
period of time (for example, for over a week)
it is advisable to draw off the water in the unit.
This will ensure freshly boiled water, not stale
water, is used to make your drinks.
Similarly, if left unused it is possible that some
scale residue will collect in the outlet tap. This
will cause the outlet water to appear milky for
a short while. If this occurs it is recommended
that the first few cups are drawn off and
discarded.
Areas prone to freezing
Care must be taken to prevent the unit
freezing. If thought to be frozen it must not be
switched on. It must be left to thaw and must
be inspected to ensure it is undamaged before
use.
Installation by a licensed tradesperson
Only a licensed tradesperson can install,
adjust, maintain, and service the Rinnai Boil &
Brew. Any work carried out by a non-licensed
tradesperson is illegal and will void any
warranty.
Hold down to
fill a cup
Pull up and lock
into place for
continuous flow
