16
|
Rinnai Boil & Brew: Owner and installer guide: 20830-B 02-17
Warranty terms and conditions
1. All terms of this warranty are effective from the date of installation. The attending service
person reserves the right to verify this date.
2. All Rinnai Boil & Brew units must be installed, commissioned, serviced, repaired and removed
in accordance with the manufacturer’s installation instructions, local regulations, and
municipal building codes by persons authorised to do so.
3. All Rinnai Boil & Brew units must be operated and maintained in accordance with
manufacturer’s instructions.
4. The warranty applies only to the components supplied by Rinnai. It does not apply to
components supplied by others, such as, but not limited to these, electrical switches, pipe
work, electrical cables, and fuses.
5. Where the unit has not been sited in accordance with the installation instructions or installed
such that normal service access is difficult, a service charge will apply. If at the discretion of
the attending service person the installation is deemed illegal or access is dangerous, service
will be refused. Any work required to gain reasonable access to the unit will be chargeable by
the attending service person.
6. The warranty is for the period indicated in the summary table. Where the inner copper
interior and/or part is replaced under warranty the balance of the original warranty will
remain effective.
7. Rinnai reserve the right to transfer functional components from defective units if they are
suitable.
8. Rinnai reserve the right to have the installed product returned to the factory for inspection.
9. Where the unit is installed outside the metropolitan area or further than 40 km from a Rinnai
authorised service centre, travel costs shall be the owner’s responsibility.
