- 25 -
OPERATION WITH DELUXE TEMPERATURE CONTROLLERS
Step 2 Ð Activate the automatic bath fill function and follow the voice prompts.
(a) Ensure the system is switched on. When the system is ON, the monitors will be lit. Ensure
the ÔTransferÕ button is lit. If not, press the ÔTransferÕ button once.
(b) Press ÔBath fillÕ button. The ÔBath fillÕ button
will light up and the buzzer will sound. The
ÔBathÕ indicator on the Kitchen Controller
monitor will light up. The voice will say ÒThe
hot water system is ready. Open the hot water
tap.Ó
(c) Open the hot water tap for the bath. The
combustion indicator on all Temperature
Controller will light up and the bath will start to
fill.
If you wish to stop the water flow whilst the bath fill function is in operation, simply press
the ÔBath fillÕ button. The ÔBath fillÕ button will flash and the voice will say ÒTurn off all
hot water taps and press the ÔBath fillÕ buttonÓ. Follow these instructions.
(d) When the bath is filled to the programmed volume and temperature (see ÔStep 1Õ):
the flow from the bath hot water tap will stop;
the ÔBath fillÕ button on the Bathroom Controller(s) and the ÔBathÕ indicator on the
Kitchen Controller monitor will flash;
the buzzer will sound;
the voice will say ÒBath fill is complete. Turn off the bath hot water tap and push the
ÔBath fillÕ button.Ó
(e)
IMPORTANT Ð Close the hot water tap for the bath
. This is very important to prevent over
filling of the bath.
(f) Press the ÔBath fillÕ button. This is also important. It tells the hot water unit that the customer is
aware that the bath fill function has been completed and that the hot water tap for the bath has
been shut. The hot water unit will not allow hot water to flow from any fixture until the ÔBath
fillÕ button has been pressed.
The Bath fill button light on the Bathroom Controller and the ÔBathÕ indicator on the Kitchen
Controller monitor will go out.
Sound
ON/OFF
Transfer
Bath temp.
Water Vol.
C
C
Bath Fill
Hot water temp.
Vol.
BC - 70 - 1A
During bath fill, the time display on the Bathroom Controller will slow the remaining bath
fill volume and will Ôcount downÕ as the bath is filled.
NOTE
NEVER LEAVE YOUNG CHILDREN UNATTENDED IN THE BATH.
When using the ÔBath fillÕ function, ALWAYS close the hot water tap for the bath after the
bath has filled and flow has stopped.
CAUTION
