- 23 -
OPERATION WITH DELUXE TEMPERATURE CONTROLLERS
Deluxe Bathroom Controller
Ensure the system is switched ON. When the system is ON,
the monitors will be lit. Ensure the ÔTransferÕ button is lit. If
not, press the ÔTransferÕ button once.
Select the desired temperature using the ÔHot water temp.Õ
buttons. The selected temperature will be displayed at the top
of all controller monitors.
Open the hot water tap. The hot water unit will activate and
the red combustion symbol will light on both bathroom and
kitchen monitors.
Bath Fill Function
The ÔBath fillÕ function enables a bath to be filled to the desired level at the desired temperature
automatically.
There are 2 steps to perform :
Step 1. Program the bath volume and temperature into the Bathroom Controller(s)
(BC-70-1A/BSC-70-1A).
Step 2. Activate the automatic ÔBath fillÕ function and follow the voice prompts.
Step 1 - Programming the bath volume and temperature
When the controllers are first turned on, the default bath fill
temperature is 40
o
C and the bath volume is 100 litres (indicated
by the first level marker at the bottom of the monitor). The bath
volume can then be changed up to a maximum of 400 litres in 20
(or 50) litre increments. These settings are displayed at the
bottom of the Bathroom Controller monitor and can be changed
by the user as described below.
(a) Ensure the system is switched ON. When the system is ON, the monitors will be lit. Ensure the
ÔTransferÕ button is lit. If not, press the ÔTransferÕ button once.
Sound
ON/OFF
Transfer
Bath temp.
Water Vol.
C
C
Bath Fill
Hot water temp.
Vol.
BC - 70 - 1A
Sound
ON/OFF
Transfer
Bath temp.
Water Vol.
C
C
Bath Fill
Hot water temp.
Vol.
BC - 70 - 1A
HOT
COLD
C
AM
C
CHECK WATER TEMPERATURE BEFORE USE.
CAUTION
When using the ÔBath fillÕ
function for the first few times, it is
recommended that you are present during the filling process.
CAUTION
C
