Diagnostic Tests for the Rimage Professional™ 3400 and 5400N
4
2001497_A
Cycle 2: Cycle a Disc at the Recorder
1.
Select diagnostic test 2. Refer to page 3.
2.
Open the
recorder tray
.
Important!
Make sure the printer tray is closed.
3.
Place
one disc
on the recorder tray.
4.
Press
button 1
to begin the cycle. The operator panel displays
[02 CYCLE TEST CHECKING DEVICES]
.
•
The lift arm picks and places the disc at the recorder tray.
•
The operator panel displays
[02 CYCLE TEST CYCLE = XXXXXX]
, where X is the number of cycles
completed.
5.
Press
button 1
to stop the cycle and return to diagnostic test mode. The operator panel displays
[00
CHOOSE DIAGNOSTIC]
.
6.
Remove the
disc
from the recorder tray.
7.
Close the
recorder tray
.
8.
Repeat
steps 1 – 7
for the second recorder tray.
Cycle 3: Cycle a Disc between the Recorder and the Printer
1.
Select diagnostic test 2. Refer to page 3.
2.
Press
button 2
to open the printer tray.
3.
Open the
recorder tray
.
4.
Place
one disc
on the recorder tray.
5.
Press
button 1
to begin the cycle. The operator panel displays
[02 CYCLE TEST CHECKING DEVICES]
.
•
The lift arm begins to cycle the disc between the open recorder tray and printer tray.
•
The printer tray opens and closes with each cycle.
•
The operator panel displays
[02 CYCLE TEST CYCLE = XXXXXX]
, where X is the number of cycles
completed.
6.
Press
button 1
to stop the cycle and return to diagnostic test mode. The operator panel displays
[00
CHOOSE DIAGNOSTIC]
.
7.
Remove the
disc
from the printer or recorder tray.
8.
Press
button 2
to close the printer tray.
9.
Close the
recorder tray
.
10.
Repeat
steps 1 – 9
using the second recorder.
