20
2001475_A
Rimage Producer™ III User Guide
7100N/8100N/6100N/6100
9.
Manually, slightly rotate the
carousel
so that the distance between
the edges of the carousel and the edge of the disc is equal on all
four points, as shown.
Note:
The edge of the disc should not touch any part of the
carousel. If you cannot center the carousel in this step, the lift
arm may need to be readjusted.
10.
Press the
operator button
.
• The lift arm lowers and pins the disc into the bottom of bin 1 to measure the gear-train backlash of the carousel.
Note:
The operator panel displays [BACKLASH O+00000 N+00000], where O+00000 is the old offset value and
N+00000 is the new offset value based on the current position of the carousel adjusted for backlash.
• The lift arm releases the disc into bin 1.
• The autoloader exits diagnostic test 3 and the system restarts.
Note:
Diagnostic test 3 causes the autoloader to exit diagnostic mode. To continue the diagnostic tests, refer to
the
Access and Select Diagnostic Tests
section on page 16.
Align the Printer
This section provides instructions to align the Everest or Prism printer to your autoloader.
#
Required tools:
• Torx T25 screwdriver
• 5/32"Allen wrench
1.
Power on the
autoloader
. Refer to the
Power On the Producer III
section on page 12.
2.
Wait for the autoloader to complete initialization.
Tip:
The autoloader takes one to two minutes to complete initialization.
3.
Open the
front door
of the autoloader.
4.
Prepare the system for alignment.
a.
Manually, slowly move the
lift arm
to
the top of the column.
b.
Place a
disc
on the lift arm. Press the
disc into the gripper while you press
the disc release button.
c.
Press the
printer button
. The printer
tray opens.
Lift Arm
Disc Release Button
Gripper
En
gli
sh
Содержание Producer III 6100
