1
For more information visit
www.rimage.com/support
2004827_B
Introduction
This manual provides the information needed to configure, operate,
and maintain the Rimage Maestro Automated USB Publishing System.
• The terms "system" and "autoloader" may be used throughout this
manual to refer to the Maestro product.
• The term printer refers to the Everest Encore CP printer.
Important!
Your Maestro system may not look exactly like the model
featured in this
User Guide
.
About this User Guide
• While Rimage maintains all versions of our manuals and
documentation, please note that the English version found on the
Rimage website always contains the most up-to-date information.
• Unless otherwise indicated, all Windows navigation statements are
Windows 10 paths. Other Windows operating system navigation
may differ slightly.
• The following notes and symbols are used throughout the manual
to help clarify information:
Note:
A Note provides supplemental information or information that
may apply only in special cases.
For example, memory limitations, equipment configurations, or
details that apply to specific versions of a program.
Tip:
A Tip will point out alternative methods that may not be obvious
as well as further illustrating the benefits and capabilities of the
product.
Important!
•
An Important section provides information essential to the
completion of a task.
•
Vital supplemental information.
•
You can disregard information in a Tip and still complete a task,
but do not disregard an Important section.
Caution:
A Caution indicates that failure to observe this guideline could
result in loss or damage to the equipment, product, software, or data.
Warning!
A Warning indicates that failure to follow this guideline
could result in bodily injury to personnel operating or maintaining
the equipment.
About the
Maestro System
The Maestro system comes with the Everest® Encore™ CP printer. For
information about your printer, refer to the
Rimage® Maestro
Setup and
Installation Guide and/
or
Everest Encore
CP
User Guide
that shipped with
your printer.
The embedded Maestro has an internal control center PC. This
embedded PC is a network-ready device that can receive orders from
other networked computers. You can also operate the Maestro locally
by attaching a monitor, keyboard, and mouse.
The non-embedded Maestro requires an external PC to be used as the
external control center. In most instances, the Maestro is not shipped
with an external PC. You must provide a PC to be used as the external
control center. Refer to the Maestro specifications for minimum and
optimum PC requirements.These technical specifications can be found
at
www.rimage.com/support
.
Unpacking and Setup Instructions
To unpack your Maestro system, refer to the unpacking label on the
box. For setup instructions, refer to the
Maestro Setup and Installation
Guide
that shipped with your product.
