For more information visit
www.rimage.com/support
2004827_B
11
Loading the Case Magazines
Tip:
You can load up to 25 cases in each of the 4 magazines for a total of
100 cases. Please use the procedure below to insert the cases into a
magazine.
1. Remove the Case Magazine from the
Maestro by pulling straight up.
2. Press the latch release button on the
bottom of the magazine, and slide the
magazine cover open.
Note:
When opening, be careful to keep the magazine oriented with the
latch release at the bottom to avoid accidentally emptying the contents
of the magazine.
3. The Case Magazines are designed to
hold either Thumb Cases or Pocket
Cases. Use the correct magazine for
your use case.
4. Insert cases with the data module
opening facing upwards and the
lanyard hole aligned to the left as
shown.
Note
:
Whether using thumb or pocket
cases the orientation is the same.
5. Slide the magazine cover closed until
latched.
6. Insert the Case Magazine back into
the Maestro system until it clicks into
place.
7. Repeat for each of the Case Magazines.
Resuming the Maestro System
Note:
Resuming the Maestro requires the use of the AutoConductor
software. For more details on installation, configuration, and use of
AutoConductor please refer to the Software User Guide.
1. On the left panel of the AutoConductor window, select the
Maestro station you wish to resume.
2. Click the Resume button in the upper right of the main panel.
Latch Release
