Rikon Power Tools 34-260, Руководство оператора

Страница: 7 / 20

GETTING TO KNOW YOUR MACHINE
CONTENTS OF PACKAGE
7
Model 34-260 Benchtop Mortising Machine is shipped complete in one box.
Unpacking and Clean-up
1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to make sure
that all of the items are accounted for, before discarding any packing material. Place parts on a protected surface
for easy identification and assembly. If any parts are missing or broken, please call RIKON Customer Service (877-
884-5167) as soon as possible for replacements. DO NOT turn your machine ON if any of these items are missing.
You may cause injury to yourself or damage to the machine.
2. Report any shipping damage to your local distributor.
3. Clean all rust protected surfaces with ordinary house hold type grease or spot remover. Do not use; gasoline, paint
thinner, mineral spirits, etc. These may damage painted surfaces.
4. Apply a coat of paste wax to the table to prevent rust. Wipe all parts thoroughly with a clean dry cloth.
5. Set packing material and shipping carton aside. Do not discard until the machine has been set up and is running
properly.
J
A
E
B
D
F
C
H
G
I
L
M
B
A Base
B Stop Rod & Locking Handle
C Gas Return Strut
D Tool Holder
E On/Off Switch Electrical Box
F Feed Handle
G Motor
H Chuck Housing & Access Covers
I Chisel and Drill Bit
J Hold Down Clamp
K Table Control Knob - Forward-Back
L Table Hand Wheel - Side-to-Side
M Sliding Plate Locking Handle
N Handle Locking Handle
O Depth Stop Lock Lever
P Fence
J
K
E
N
O
F
L
P