RIKA INTERNO, Руководство по эксплуатации GSM

Страница: 30 / 40

7. OPERATION
Save your telephone-number (done only once)
The operation of the stove is controlled by SMS commands. These
consist of the reception code you selected (described earlier) and a
command. After correct installation of the GSM set you must save a
valid telephone number on the device. (This is not possible when you
suppress your telephone number.)
In this case the TEL command follows the reception code.
Example-SMS
1234 TEL
(Note the SPACE
between code and
command)
The device will save the telephone
number and send a confirmation
message back (MOBILE NUMBER „your
number“ OK).
Now you are able to set the stove to another operating mode by using
SMS-commands.
Note
You are also able to save a new number by sending a TEL code
again.
You also can send commands without registering a telephone number
using simply the reception code. In this case you will get back a
message „Please save TEL. number“ in your answer-SMS.
Caution:
If no telephone number is stored at the device you will not receive
any message in case of errors.
The simplest command is switching ON and OFF:
Example SMS:
1234 ON
(Note the SPACE
between reception and
command code)
Device ON with presetting (operating
mode and setting maintained from
previous operation, e.g. HEAT 35,
AUTO)
1234 OFF Device OFF
Commands - Control panel
Additional you also have the possibility to change the mode of
operating. If there is a room sensor installed, you can switch between
three different modes. (HEAT / ROOM / AUTO)
You simply write the command after the reception code and a space.
Example
SMS:
1234 heat
Switch to HEAT, device ON (device setting
maintained from previous operation e.g. 35%
heat output)
Example SMS:
1234 room
Switch to ROOM, device ON (Device setting
maintained from previous operation e.g. 25°C
room temperature)
Example SMS:
1234 auto
Switch to AUTO device ON (device setting
maintained from previous operation – drop
temperature, heating temperature, time frames)
In addition to changing the mode of operation you can also enter and
change the operation values of HEAT and ROOM per SMS. (Heat output
in % in HEAT mode and room temperature in C° in ROOM mode).
You write the required value behind the initial letters of the operating
mode (h for HEAT and r for ROOM).
Example SMS
1234 r21
Switch to selected operating mode (ROOM).
Device setting changed to the required setting
e.g. 21°C room set temperature.
Example SMS :
1234 h65
Switch to selected operating mode (HEAT).
Device setting changed to the required setting
e.g. 65% heat out-put.
In automatic mode the settings of the room temperature are not
possible. Changes must be carried out directly at the device.
SMS Replies - Control Panel
On activation of the SMS option each change of state is acknowledged
by an SMS reply. When you send a SMS message to your RIKA pellet
stove you must not suppress your telephone number. More detailed in-
structions for activation of sending the telephone number can be found
in the operating instructions of your mobile phone.
Successful switching on and mode switching by SMS is acknowledged
by a SMS confirmation.
Examples:
Operating
mode:
Confirmation SMS for a switched on device
HEAT Modus
Stove ON – HEAT 30 (value can vary according
to setting)
ROOM Modus Stove ON – ROOM 25 (value can vary according
to setting)
AUTO Modus Stove ON – AUTO
If the device is switched off by SMS then a successful switch off is
acknowledged by a confirmation SMS message.
SMS message: Stove OFF is sent back.
If there is an error when a new command SMS is received, notification
of the error is sent back by SMS. You will receive notification of the
error on your mobile phone.
Examples:
Error Text-message
Error “NO PELLETS” FAILURE: no pellets
Error “FAN DEFECT“ FAILURE: fan defect
Safety related error
“CALL SERVICE” - the GSM
function will be deactivated
FAILURE: call service – GSM off
If an error occurs in the
reception code.
FAILURE: code error
If a wrong command was sent. FAILURE: text error
If an error occurs during operation, the respective error is sent by SMS
message to the number saved at the device.
Caution:
If no telephone number is stored at the device you will not receive
any message in case of errors.
Caution:
The error messages “STB” and “DOOR OPEN” will not be sent via
a message.
30