RIKA Cult Plus, Инструкция по эксплуатации

Страница: 17 / 20

- 17 -
E
N
G
L
IS
H
7 . P R O B L E M S O L V I N G
WHAT TO DO IF…?
Problem Reason Solution
1.Door glass soots up too quickly
•
bad draught
•
Rikatronic fault
•
too much fuel
•
damp wood
Basic procedures: from time to time
(according to use) each glass pane
must be cleaned with RIKA glass
cleaner. Check with chimney sweep
(chimney may need to be raised)
Check the functioning of Rikatronic*
see: "max. fuel quantities"
see: "clean combustion", use wood
briquettes if necessary (uniformly dry)
2. Stove does not draw correctly
•
Insufficient chimney draught
•
Stove is sooted up internally
•
Rikatronic fault
see: "Heating instructions"
see: "Servicing and cleaning“
Check the functioning of Rikatronic*
3. Stove does not burn correctly
•
Effects of weather
•
Incorrect heating
•
Rikatronic fault
see: "Making the fire"
see: "Making the fire"
Check the functioning of Rikatronic*
4. Stove smells strongly and smokes on
the outside
•
Firing phase
•
Stove is dusty/dirty
see: "Operation" (hardening of paint)
see: "Convection air openings"
5. Paint does not harden
•
Firing phase not completed
correctly
see: "Operation"
(hardening of paint)
6. Smoke emissions when adding fuel
and during the heating phase
•
insufficient chimney draught, flue
pipe connection not sealed check connection points and re-seal if
necessary
* Check that the controller is functioning correctly. If the air valve is closed operate the On/Off switch and listen for
the opening sound. Check the door contact switch: on closing the door listen for the “clicking noise” If the
regulator or door contact switch is faulty inform RIKA customer services
Should you not be able to find the correct solution to your problem, then please contact your special list dealer or
your chimney sweep.