RIKA Cult Plus, Инструкция по эксплуатации

Страница: 16 / 20

- 16 -
E
N
G
L
IS
H
6 . M A I N T E N A N C E A N D C L E A N I N G
GENERAL MAINTENANCE
Your stove has been designed by our development
team with minimal maintenance in mind and for a
very long service life. Certain cleaning activities and
checkin the seals are however necessary from time
to time.
The time periods between the inspection intervals
are above all dependent on the fire wood quantity
used and the frequency of use.
All maintenance and cleaning work must only be
carried out when the fire is completely cooled down.
ONCE MORE
Only use wood that has been stored properly and is
dry and untreated.
Feed the correct quantity of wood into the fire.
Should the fuel be poor, the number of necessary
maintenance activities can more than double.
FINISH – CONDITION AND
CLEANING
The door glass can be cleaned using RIKA glass
cleaner. The RIKA glass cleaner can be obtained
from your specialist fire dealer. Should the glass
become heavily sooted the possible cause could be
damp wood.
The fire finish is highly refractory and must only be
cleaned using a cloth (damp if necessary). Only use
original paint for touch up work, this is available
from your specialist dealer as an accessory.
Under no circumstances must the paint be
cleaned before heating for the first time!
CONVECTION AIR OPENINGS
Regularly clean dust deposit from the convection air
openings. The fire should be cleaned thoroughly
before the start of the new heating season, in order
to prevent strong odours.
CLEANING THE FLUE GAS
CHANNELS
(1 x annually)
- Removing the flue pipes
-
Brush off any soot and dust deposits in the fire
and in the flue pipes and vacuum.
- Check the seals on the fire door or the ash
drawer before the beginning and end of the
heating period. Should they be damaged or
excessively worn, then please order the relevant
replacement.
Only intact seals guarantee the perfect function of
your fire.