RIGOL
Chapter 3 Demo Board Applications
User’s Guide for DS6000 Demo Board
3-30
3.2.11 Glitch Signal of Square Waveform
1.
Signal Explanation
Signal Output Pin:
GLITCH_CLK
The frequency of the square waveform is 1MHz, the glitch width is 2ns and the position of the
glitch is not fixed.
2.
Functions
Edge trigger, pulse trigger
3.
Demonstration and Result
Connect the signal output pin GLITCH_CLK and GND to CH1 of the oscilloscope properly using
the probe;
Set the trigger type to “Edge”, the signal source to “CH1”, the edge type to “Leading”, the trigger
mode to “Normal” and the vertical scale to “500 mV”; adjust the vertical position and trigger
level to appropriate values. The demonstration result is as shown in the figure below.
Figure 3-34 Square Waveform Glitch Signal
www.
GlobalTestSupply
.com
Find Quality Products Online at:
