Chapter 3 Demo Board Applications
RIGOL
User’s Guide for DS6000 Demo Board 3-7
Connect DIFF_SIG_P and GND to CH1 of the oscilloscope using single-ended probe;
Connect DIFF_SIG_N and GND to CH2 of the oscilloscope using single-ended probe;
Set the trigger type to “Edge”, the trigger mode to “Single” and the vertical scale to “500 mV”;
adjust the vertical position and trigger level to appropriate values to make the oscilloscope
trigger stably. The demonstration result is as shown in the figure below.
Figure 3-8 Differential signal Demonstration Using Single-ended Probe
Enable MATH function (A-B). Set source A to CH1 and source B to CH2. The operation result is as
shown in the figure below.
Figure 3-9 MATH Function Demonstration Using Single-ended Probe
www.
GlobalTestSupply
.com
Find Quality Products Online at:
