Rigol DG1022Z, Руководство пользователя

Страница: 89 / 180

Chapter 2 Front Panel Operations RIGOL
DG1000Z User’s Guide 2-51
Phase Shift Keying (PSK)
When PSK (Phase Shift Keying) modulation is selected, you can configure the
generator to “shift” its output phase between two preset phase values (“carrier
phase” and “modulating phase”).
To Select PSK Modulation
Press Mod

Type

PSK to enable PSK function. When Mod is enabled, Sweep
or Burst will be automatically disabled (if enabled currently).
To Select Carrier Waveform Shape
PSK carrier waveform could be Sine, Square, Ramp or Arbitrary waveform (except
DC). The default is Sine.

Press the front panel key Sine, Square, Ramp or Arb (you need to press
Select Wform in the arbitrary waveform setting interface to select the desired
arbitrary waveform) to select the desired carrier waveform shape.

Pulse, Noise and DC could not be used as carrier waveform.
To Set Carrier Waveform Parameters
The different settings of various parameters (frequency, amplitude, DC offset, start
phase and etc.) of the carrier waveform will influence the PSK modulated waveform.
For different carrier waveform shape, the ranges of the various parameters are
different (the ranges are related to the model of the instrument used and the carrier
waveform currently selected. See “Specifications” for details). For all carrier
waveform shapes, the default values are 1kHz frequency, 5Vpp amplitude, 0V
DC
offset and 0° start phase.

When the carrier waveform currently selected is Sine, Square or Ramp, please
refer to the introduction in “To Output Basic Waveform” to set the
parameters of the carrier waveform currently selected.

When the carrier waveform currently selected is arbitrary waveform, please
refer to the introduction in “To Output Arbitrary Waveform” to set the
parameters of the carrier waveform currently selected.