Rigol DG1022, Руководство пользователя

Страница: 40 / 147

RIGOL
© 2008 RIGOL Technologies, Inc.
User’s Guide for DG1022
2-16
To Set Arbitrary Waveforms
Press the Arb button, in the Normal Mode, the operation menu will appear at the
bottom of the screen. Set the Arbitrary Waveform parameters by using the operation
menu.
Arbitrary Signals are divided into two categories: the built-in optional system
waveforms and the user-definable arbitrary waveforms. The parameters for Arbitrary
Waveforms are:
Frequency/ Period, Amplitude/ High Level, Offset/ Low Level and
Phase
. See Figure 2-19, in the operation menu, select Freq, and the corresponding
frequency will be displayed in inverse color for which users can make a change.
Figure 2-19
Arbitrary Signal Parameter Setting Interface
Table 2-6 Arbitrary Signal Operation Menu
Menu Settings Explanation
Frequency/
Period
Setting the signal’s frequency or period; the
current parameter will switch at a second press.
Amplitude/
High Level
Setting the signal’s Amplitude or High Level; the
current parameter will switch at a second press.
Offset/Low
Level
Setting the signal’s Offset or Low Level; the
current parameter will switch at a second press.
Load Select the built-in Arbitrary Signal as Output.
Edit Create and Edit Arbitrary Waveform.
Phase Setting the initial phase of the signal