Phoenix HT User Manual
© 2007–2012 Rigaku Automation, Inc.
31
401718 Rev A
5. Remove the velcro strap (if present) and the P-clamp that holds the harness in place on the
nano head.
6. Remove the P-clamp on the back of the Phoenix system that also holds the harness in place.
7. Disconnect the nano dispenser from the nano dispense controller:
1
Unsnap and disconnect the black electrical wiring from the nano dispense controller.
Remove velcro strap.
Unscrew and remove P-clamp holding the
harness on the nano head.
Also unscrew and remove the P-clamp on the
back of the Phoenix system which holds the
harness in place.
Separate the black electrical connector, into two
parts.
