Rifu Packaging Machinery RF-230, Инструкция по эксплуатации

Страница: 8 / 15

3. label installment
：
Take extra caution on the position A and B as shown below
(1)
：
Label flows direction when label winding is on the inside.
(2)
：
Label flows direction when label winding is on the outside.
When passing through label
，
please pull and loosen label paper appropriately and then
tension the label paper with turning label wheel spindle C after passing through.
4. Adjust Tightness When Pulling Paper
：
Adjust positions of fillet wheel D and press plate E
（
refer to label installation diagrams
DE
）
and then make label position of dispensing plate smooth as diagram below.
5. Adjust Electronic Sensor
： （
User need not adjust it again because it has been
adjusted before leaving factory in normal condition
）
①
Sensitivity Adjustment
：
Move the objects of electronic sensor and reflector plate, adjust
sensitive adjusting knob of electronic sensor to minimal counterclockwise
，
adjust it clockwise
to indicating lamp bright and then turn hemicycle again
，
this is optimum position and the
standard is no secondary signal outputting when labeling object passing electronic sensor.
②
The position of electronic sensor should not be changed at discretion because it is
relative with memory data.
7