Safety Information for Machine Operation
I. Mechanical Specifications and Parameter.
II. Installation.
III. Functional Description and Troubleshooting.
IV. Basic Operation and Application.
V. Main Points of Simple
M
alfunction and Elimination Methods.
Note
：
Please use and maintain this equipment strictly according to operation regulations of
instruction manual
，
prohibit to open and disassemble during warranty period
，
otherwise any damage of this equipment or parts shall NOT be warranty and any
repair or replacement of parts will be chargeable. This instruction manual is subjected
to change without prior notice
；
if any customer has doubt on the operation, please
contact our company for clarification.
Safety Information for Machine Operation
In order to avoid unexpected accident of personnel and reduce the frequency of
damages to equipment, please read carefully the relative safety items of this instruction
manual before switching on power supply.
1. When operating with corrosive product
，
please pay attention to avoid the product touching
or splashing to the equipment and operators.
2. Do not use this equipment in places where there is vibration or easy be collided.
3. When the equipment is in operation, operator must pay attention not to get in contact with
any moving part of the machine.
4. When installing the equipment, pay attention to avoid approaching overheated or
combustible materials.
5. The equipment must be kept dry and earth/ground wire must be connected to equipment at
all time for the safety of operators.
6. Operator should keep his body and spirit in normal condition
，
if has taken some medicines,
such as alcohol
，
soporific or other drugs which may injure mental state
，
he must stop to
operate the equipment.
7. Operator shall wear proper clothing and avoid injury caused by clothing of operator is
involved in moving parts or placing unrelated matter on the equipment.
8. If any abnormal phenomenon and noise is found during operation, please immediately stop
the equipment and carry out inspection.
9. Do not adjust the parts of equipment at discretion except engineering and technical
personnel.
10. Maintain the equipment regularly
（
once / week
）
and avoid water or any liquid splashing
electronic control box or other electrical parts when cleaning it.
11. Please keeping the equipment surface nattily and operate it according to normal working
process.
1
Содержание RF-230
Страница 1: ...Instruction Manual...
