Rifu Packaging Machinery RF-230, Инструкция по эксплуатации

Страница: 7 / 15

One Label output: press “one label output” label head system output once label. It is use to
test the label step motor.
Labeling test : it is same to--one label output.
Label delay: the sensor of object to start,delay the time (setting time)later,the step motor
working off label output,labeling the object position where you want to.
Label length setting
：
As the distance from head end of label to electronic eye of label
，
the
value scope is 0 - 300
，
units
：
mm
，
touch the number with finger can
enter keyboard input method and the value can be fine adjusted to
change hanging label length by pressing keys of number.
Check label position
：
As the time length from electronic eye inspecting object to start
outputting Label, touch the number at right side of labeling position with
finger can enter keyboard input method and the value can be fine adjusted
by pressing keys of number.
.
1. Adjustment of Labeler
：
After completing adjustment of side guides
，
adjust the two turning handles as shown
below; according to the height and label dispensing position for the object to be label to pass
through. The operation and movement should be stable and smooth.
6