20
Pelvic support
Attaching
To prevent tipping and
resulting injury, do not
position prompts at the rear ends of the
top bar (see fi gure 20a).
The pelvic support provides weight-bearing
assist. It is an alternate option to the hip
positioner. Attach this accessory with its
two clamps and handholds a few inches
from the end of the top bar. Attach straps
with buckles (A) in front of the frame cross
bar (see fi gure 20b).
Refer to the warning above for important
safety information (see fi gure 20a).
To attach front of pelvic support
• Use buckles (A) to attach the pelvic
support at the optimal location indicated
for positioning. Locations for strap
attachment may include any secure
position along the top bar of the frame
in front of cross bar, at the base of the
clamps/accessories in use, or at the
chest prompt cross bar.
To attach rear of pelvic support
• Attach rings to handholds (B)
(see fi gure 20b).
Figure 20b
B
B
WARNING
Figure 20a
A
A
