background image

4

•  Thoroughly read and understand the information in this product manual before attempting 

to use this product. If the procedures and instructions in this product manual are not 
followed, serious injury or death could occur. 

•  A qualifi ed professional must assess the appropriateness and safety of all equipment for 

each client.

•  This product is intended for use by clients of unreliable judgment. Adult supervision is 

required at all times. 

•  To prevent falls and injuries:

 

Do not use this product on rough and uneven terrain, around swimming pools, or near 
stairways.

 

Ensure the appropriate use of straps and supports at all times. Straps and supports 
are provided for the safety of the user and must be carefully adjusted for comfort and 
security.

 

Tighten all adjustment knobs before use and immediately after making any adjustments.

 

Position accessories so that the client’s weight is centered between the casters.

•  Do not use this product for clients outside the height and weight limits specifi ed in this 

manual.

•  To prevent structural failure, which may result in serious injury or death:

 

Inspect this product and accessories regularly for loose or missing screws, metal fatigue, 
cracks, broken welds, missing attachments, general instability or other signs of excessive 
wear.

 

Immediately remove this product from use when any condition develops that might make 
operation unsafe.

 

Do not use Rifton components or products for any purpose other than their intended use.

•  Adequately supervise use of the Pacer to prevent:

 

Excessive movement and speed

 

Sudden stops from hitting a curb, cracks, or debris

•  Use adequate accessories to ensure that user’s feet remain within boundaries of the Pacer 

frame. 

•  Use special care and supervision when using the Pacer under conditions which might affect 

stability, including:

 

Uneven ground

 

Ramps, slopes, or hills

 

Clients who experience strong involuntary movements or seizures

 

WARNING      

Содержание Pacer K640 large

































Отзывы: