18
Figure 18b
Figure 18a
Hip positioner
Attaching
To prevent tipping and
resulting injury, do not
position prompts at the rear ends of the
top bar (see fi gure 18a).
The hip positioner is designed to encourage
forward-leaning. Attach this accessory with
its two clamps and handholds a few inches
from the end of the top bar. Attach straps
with buckles (A) in front of the frame cross
bar (see fi gure 18b).
Refer to the warning above for important
safety information (see fi gure 18a).
To attach the front of the hip positioner:
• Use buckles (A), attaching them at
desired location in front of cross bar (see
fi gure 18b).
To attach rear of hip positioner:
• Attach rings (B) to handholds (see fi gure
18b).
Adjustment
To adjust position of handholds on frame:
• Loosen knob (C).
• Slide handholds and clamps to desired
position on frame.
To adjust rear height of hip positioner:
• Press button (D) and raise handholds to
desired height.
• Release button (D) and push down
handholds to engage them.
To raise and lower hip positioner
use
strap adjusters (E) at back and (F) at front
(see fi gure 19a).
WARNING
A
A
B
B
C
C
D
D
E
E
F
F
