Riftek RF096-35/55-100 Series, Руководство пользователя

Страница: 29 / 34

RF096-35/55-100 [Revision 1.0.0] 12.12.2018
Pipe ID Control System. RF096-35/55-100 Series
29
3. Enter the command «ps -a» to check if the «run» process is exited. If the process
still works, kill it by the command «kill -9 XXX», where XXX – the number of the «run»
process.
4. Run the test process: «LD_LIBRARY_PATH=. ./run_contest».
5. Make a selection by typing a number [1-4]:
1 - Test the data transfer command by setting the measurement position to 10.5
mm.
2 - Test the calibration process.
3 - Test the measurement process.
4 - Test the "move to zero" process.