29
INSTALLER
INSTALLER
System B - Larger sizes
2
1
Open the door and with the aid of
a small hacksaw or a file remove the
knockout on the side opposite the
leading edge of the door (both top and
bottom).
Then seal the door by tightening the bolts (2) so that the door is self-supported by
compression against the packing.
Remove the plug (1) taking care not to lose the compressed spring inserted in the
threaded tube.
2
3
4
2
3
6
6
5
6
5
6
4
4
4
Remove the bolt (3) and the nuts (4).
Remove the nuts (4) that secure the hinge plate (5) to the door and remove the
plate.
Remount the hinge plate on the opposite side, ensuring that the cylinder projecting above the nut (6) enters into its slot. If nec-
essary tighten the nut (6) to raise it. Lastly, tighten the bolt ((3).
