Riello RX 500 S/PV, Регулируемая работа

Страница: 46 / 60

20138630
44 GB
Operation, indications, diagnostic
8.4.1 Error during the reset process
Tab. AD
NOTE:
During the restore process, all the parameters and settings are
written from the program module onto the memory integrated into
the device. During this process it is possible that the previous pro-
gram sequences, the parameters and the settings in the internal
memory could be overwritten!
8.4.2 Reset
Tab. AE
NOTE:
For the meaning of the diagnostic codes and errors, see the
chapter“Error code list with operation via the control box control
panel” on page 40.
The display shows rSt and Er1 , Er2 or Er3 .
For the meaning of the possible cause, see the chapter “Error code list with operation via the control
box control panel” on page 40
Alternatively with
or
or
with
Pressing for 1...3 seconds displays OFF.
When the button is released the unit has been reset.
nfo
> 1s
nfo