Riello RS 200/EV BLU TL, Инструкции по установке, использованию и обслуживанию

Страница: 23 / 52

21
20095199
GB
Installation
4.4 Operating position
4.5 Preparing the boiler
4.5.1 Introduction
The burners are suitable for working on both flame inversion
boilers (in this case the long head model is recommended) and
boilers with a combustion chamber with bottom runoff (three
flue gas circulations), from which the best results of low NO
x
emissions are obtained.
The maximum thickness of the front hatch of the boiler
A)(Fig. 15), complete with refractory, must not exceed:
Tab. K
4.5.2 Boring the boiler plate
Drill holes in the plate shutting off the combustion chamber, as
illustrated in Fig. 16.
The position of the threaded holes can be marked using the ther-
mal insulation screen supplied with the burner.
Tab. L
WARNING

The burner is designed to operate only in
positions
1 , 2 , 3 and 4 (Fig. 14).

Installation 1 is preferable, as it is the only
one that allows the maintenance operations
as described in this manual.

Installations 2 , 3 and 4 permit operation but
make maintenance and inspection of the
combustion head more difficult.
DANGER

Any other position could compromise the cor-
rect operation of the appliance.

Installation 5 is prohibited for safety reasons.
2 3 4 5 1
Fig. 14
D7739
Blast tube A (mm)
RS 200/EV BLU 250
mm A B C
RS 200/EV BLU 230 325-368 M 16
Fig. 15
A
D1079
Fig. 16
D455