Riello RS 200/E LN, Инструкции по установке, использованию и обслуживанию

Страница: 18 / 35

20008113 16
GB
Installation
4.6 Electrode positioning
To verify the correct position of the ignition electrode (Fig. 13),
you need to separate the combustion head from the rest of the
burner.
Measures must be respected!
Proceed as follows:
³
loosen the 4 screws 3) (Fig. 12) and remove the hood 1);
³
remove the screws 2) from the two guides 5);
³
install the extensions 15) and re-screw the screws 2);
³
remove the two screws 4);
³
pull back the burner on the guides 5) of about 4”;
³
disconnect the electrode lead, then unthread the burner com-
pletely from the guides;
³
remove the screw 1) (Fig. 14) and extract the inner part 2) of
the head;
³
check the correct position of ignition electrode, as shown in
Fig. 13.
³
Re-install all components with reverse procedure.
WARNING
1/ 8"
1"
1/ 20"
Fig. 13
D11978
Fig. 14
D9284