Riello RLS Series, Инструкции по установке, использованию и обслуживанию

Страница: 5 / 40

Information and general instructions
3 20020804
1.1 Information about the instruction manual
1.1.1 Introduction
The instruction manual supplied with the burner:

is an integral and essential part of the product and must not
be separated from it; it must therefore be kept carefully for
any necessary consultation and must accompany the burner
even if it is transferred to another owner or user, or to another
system. If the manual is lost or damaged, another copy must
be requested from the Technical Assistance Service
of the area;
 is designed for use by qualified personnel;

offers important indications and instructions relating to the
installation safety, start-up, use and maintenance of the
burner.
Symbols used in the manual
In some parts of the manual you will see triangular DANGER
signs. Pay great attention to these, as they indicate a situation
of potential danger.
1.1.2 General dangers
The
dangers
can be of
3 levels
, as indicated below.
Maximum danger level!
This symbol indicates operations which, if not carried
out correctly,
cause
serious injury, death or long-
term health risks.
This symbol indicates operations which, if not carried
out correctly,
may cause
serious injury, death or
long-term health risks.
This symbol indicates operations which, if not carried
out correctly,
may cause damage to the machine
and/or injury to people.
1.1.3 Danger: live components
This symbol indicates operations which, if not carried
out correctly, lead to electric shocks with lethal con-
sequences.
Other symbols
ENVIRONMENTAL PROTECTION
This symbol gives indications for the use of the
machine with respect for the environment.
 This symbol indicates a list.
Abbreviations used
Ch. Chapter
Fig. Figure
Pag. Page
Sec. Section
Tab. Table
Delivery of the system and the instruction manual
When the system is delivered, it is important that:
 The instruction manual is supplied to the user by the system
manufacturer, with the recommendation to keep it in the room
where the heat generator is to be installed.

The instruction manual shows:
- the serial number of the burner;
- the address and telephone number of the nearest Assist-
ance Centre;

The system supplier carefully informs the user about:
- the use of the system,
- any further tests that may be necessary before the system
is started up,
- maintenance and the need to have the system checked at
least once a year by the manufacturer or another special-
ised technician.
To ensure a periodic check,
recommends the
drawing up of a Maintenance Contract.
1 Information and general instructions
DANGER
WARNING
CAUTION
............................................................................................
...........................................................................................
...........................................................................................
...........................................................................................
DANGER