Riello RLS Series, Инструкции по установке, использованию и обслуживанию

Страница: 28 / 40

20020804 26
Maintenance
6.3 Opening the burner
Disconnect the electrical supply from the burner

Remove the tie rod 1) (Fig. 29) of the head movement lever,
loosening nut 2).

Disconnect the gas servomotor test point 3).
 Disconnect the gas pressure switch test point 4).

Remove screws 5).
At this point it is possible to open the burner at the hinge.
6.4 Closing the burner

Close the burner at the hinge.
 Apply screw 5).

Connect the gas pressure switch test point 4)..
 Connect the gas servomotor test point 3).

Apply the tire rod 1) (Fig. 29) of the head movement lever,
loosening nut 2).
Connect the electrical supply from the burner.
DANGER
5
5 1
2
5
5
3 4
Fig. 29
D3818