Riello RLS 28/E, Инструкции по установке, использованию и обслуживанию

Страница: 23 / 41

21 20059594 GB
Installation
4.8 Burner refitting
➤ Refit the burner 4)(Fig. 17) to the slide bars 3) at approxi-
mately 4” from the sleeve 5) - burner positioned as shown in
Fig. 12 at page 19;
➤ insert the ignition electrode cables and then slide bars the
burner up to the sleeve so that it is positioned as shown in
Fig. 17;
➤ remove extention bars.
➤ refit screws 2) on slide bars 3);
➤ secure the burner to the sleeve by tightening screw 1);
➤ connect the oil pipes again by screwing on the two connectors
4)(Fig. 12 at page 19).
4.9 Combustion head adjustment
The setting of the combustion head depends exclusively on the de-
livery of the burner at high fire.
Turn screw 5)(Fig. 18) until the notch shown in diagram (Fig. 19) is
level with the front surface of flange 6).
Example:
high fire burner delivery = 7.3 GPH
If diagram (Fig. 19) is consulted it is clear that for this delivery, the
combustion head must be adjusted using notch 4.
CAUTION
When fitting the burner on the two slide bars, it is
advisable to gently draw out the high tension cables
until they are slightly stretched.
1 2 3
4
5
6
Fig. 17
D10466
Fig. 18
D1149
Fig. 19
Burner output in 2
nd
stage operation
20060206
N
o
.
n
o
tc
h
e
s