Riello RLS 28/E, Инструкции по установке, использованию и обслуживанию

Страница: 20 / 41

20059594 18 GB
Installation
4.1 Notes on safety for the installation
After carefully cleaning all around the area where the burner will be
installed, and arranging the correct lighting of the environment, pro-
ceed with the installation operations.
4.2 Handling
The packaging of the burner includes a wooden platform, so it is
possible to move the burner (still packaged) with a transpallet truck
or fork lift truck.
4.3 Preliminary checks
Checking the consignment
4.4 Preparing the boiler
4.4.1 Boiler plate
Drill the combustion chamber mounting plate as shown in Fig. 11.
The position of the threaded holes can be marked using the head
gasket supplied with the burner.
Tab. H
4 Installation
DANGER
All the installation, maintenance and disassembly
operations must be carried out with the electricity
supply disconnected.
WARNING
The installation of the burner must be carried out by
qualified personnel, as indicated in this manual and
in compliance with the standards and regulations of
the laws in force.
WARNING
The handling operations for the burner can be hi-
ghly dangerous if not carried out with the greatest
attention: keep any unauthorised people at a di-
stance; check the integrity and suitableness of the
available means of handling.
Check also that the area in which you are working
is empty and that there is an adequate escape area
(i.e. a free, safe area to which you can quickly move
if the burner should fall).
During the handling, keep the load at not more than
20-25 cm from the ground.
CAUTION
After positioning the burner near the installation
point, correctly dispose of all residual packaging,
separating the various types of material.
Before proceeding with the installation operations,
carefully clean all around the area where the burner
will be installed.
CAUTION
After removing all the packaging, check the integrity
of the contents. In the event of doubt, do not use the
burner; contact the supplier.
The packaging elements (wooden cage or cardbo-
ard box, nails, clips, plastic bags, etc.) must not be
abandoned as they are potential sources of danger
and pollution; they should be collected and dispo-
sed of in the appropriate places.
WARNING
The output of the burner must be within the boil-
er’s firing rate;
WARNING
A burner label that has been tampered with, remo-
ved or is missing, along with anything else that pre-
vents the definite identification of the burner makes
any installation or maintenance work difficult.
inch A B C
RLS 28/E 6
9
/
32“
8
13
/
16“
3
/
8
W
D455
Fig. 11