![background image](http://html1.mh-extra.com/html/riello/press-gbv/press-gbv_installation-use-and-maintenance-instructions_1459644020.webp)
20033090
18
GB
Installation
5.9.3
Nozzle assembly
With the burner open on the slide bars as shown in (Fig. 11 on
page 16), unscrew and remove the plastic plug 1) (Fig. 12) and
screw the nozzle 1) (Fig. 13) into the same place using a 16 mm
wrench. Do not use any sealing products such as gaskets, seal-
ing compound, or tape. The nozzle must be screwed into place
tightly but not to the maximum torque value provided by the
wrench.
Be careful to avoid damaging the nozzle sealing seat.
Lastly, close the burner by screwing in the two screws 1)(Fig. 15).
WARNING
Do not use any sealing products such as gaskets,
sealing compound, or tape.
Be careful to avoid damaging the nozzle sealing
seat. The nozzles must be screwed into place
tightly but not to the maximum torque value pro-
vided by the wrench.
WARNING
Make sure that the electrodes are positioned as
shown in (Fig. 13 on page 18).
Fig. 12
D406
Fig. 13
D407
D408
Fig. 14
Fig. 15
D409
Содержание PRESS GBV
Страница 2: ......
Страница 38: ......
Страница 39: ......
Страница 40: ...Subject to modifications RIELLO S p A I 37045 Legnago VR Tel 39 0442 630111 http www rielloburners com...