Riello INSIEME EVOe 32 B/110 LN Скачать руководство пользователя страница 2

Страница: 2 / 20

Dear Customer,

Thank you for preferring a

heating unit, a modern,

high-quality product that is able to guarantee your maximum

well-being for a long period of time, with high levels of relia-

bility and safety. In particular, if working together with a Tech-

nical Assistance Service

that is specifically prepared and

trained to perform periodic maintenance, your unit will remain

at maximum efficiency levels at minimum operating costs and if

required, replacements with original spare parts can be made.

This instruction manual contains important instructions and

precautions that must be observed to ensure the trouble-free

installation and efficient functioning of your

INSIEME EVOe 32

B/110 LN

boiler.

Please accept our renewed thanks for your purchase

Riello S.p.A.

CONFORMITY

INSIEME EVOe 32 B/110 LN

boilers conform to the following di-

rectives:

− Directive 92/42/EEC on efficiency requirements

− Electromagnetic Compatibility Directive 2014/30/EU

− Low Voltage Directive 2014/35/EU

− Ecodesign Directive 2009/125/CE for energy-related prod-

ucts

− Regulation (EU) 2017/1369 Energy labelling

− Delegated Regulation (EU) N. 811/2013

− Delegated Regulation (EU) N. 813/2013

− Delegated Regulation (EU) N. 814/2013

At the end of its life, the product should

be not be disposed of as solid urban

waste, but rather it should be handed

over to a differentiated waste collection

centre.

ENGLISH

Содержание INSIEME EVOe 32 B/110 LN





















Результаты поиска

Содержание INSIEME EVOe 32 B/110 LN

Отзывы:

Похожие инструкции для INSIEME EVOe 32 B/110 LN

Бренды по названию

Популярные бренды

Riello INSIEME EVOe 32 B/110 LN, Руководство пользователя

Результаты поиска

Содержание INSIEME EVOe 32 B/110 LN

Отзывы:

Похожие инструкции для INSIEME EVOe 32 B/110 LN

Бренды по названию

Популярные бренды